Enter your leg length, width, thickness and screw size, choose how tight the screw holes should be, and get a printable bracket that fits your build. Deterministic and free.
Right-angle L bracket sized to your part, with a screw hole you can dial from snug to loose.
How far each arm of the bracket reaches along the surface.
Width of the bracket across the corner.
How thick each arm is. Thicker is stronger.
Diameter of the screw shaft. The Fit slider adds clearance on top.
How loose the printed part sits on the thing it mates with. Looser prints fit more easily.
Snug adds 0.10mm, Normal adds 0.25mm, Loose adds 0.50mm to the surface that mates with your object, so the printed part clears it without extra sanding.